PROBE UNIT
The probe unit contains all of the functional parts of the system with the exception of the battery and optional features. The components are the camera housing, the articulating joint, the telescoping probe, control console / handle, and the detachable video monitor. The unit weighs 7 pounds. The telescoping portion of the probe is constructed of high quality, aluminum and is protected by a hard anodized finish. In a collapsed state the system measures 41" , extended it reaches 92". The pistol grip houses the rocker switches that remotely control the head articulation, the illumination, and the audio

CAMERA HOUSING
The water resistant, dust tight, camera housing measures 1.7" in diameter and contains the miniature, color, video camera and the variable intensity illumination source. The high resolution, low light camera is prefocused and viewing distance is from six inches to over 20 feet in zero light. The camera head can be rotated to adjust the orientation of the picture when the unit is being used in a vertical positions. Illumination is provided by a high intensity Xenon lamp. The standard camera head is not designed for underwater viewing.

ARTICULATING JOINT
The articulating joint has a right to left head travel of 180° providing a viewing angle of 260°. Articulation is controlled remotely from the control console located in the pistol grip handle. The unit automatically detects left, center, and right travel limits of the head and interrupts the travel as well as signaling the operator via on screen graphics. When articulation is used in conjunction with rotating the probe an entire void space can be easily viewed.

VIDEO DISPLAY
A detachable LCD active matrix screen provides a quality image to the operator. Depending upon operational circumstances it may be desirable to remove the screen from the probe using the quick connect bracket. Optional 15' extension cables allow the monitor to be extended over 30' away from the operator for viewing by other personnel. An auxiliary multi-purpose port allows several optional components to be utilized including a hard wired remote monitor that allows simultaneous viewing by several personnel.

ACOUSTICAL SEARCH
The noise attenuating headset allows the operator to conduct acoustical searches in high ambient noise environments. The boom microphone allows the operator to communicate with a victim through the speaker built into the camera housing. The acoustical search function of the Searchcam is very effective because the microphone can be inserted into the structure below the surface. This allows the victim's cries for help to be detected even when the the sound does not reach the surface of the collapse.

CONTROLS
The ergonomically designed pistol grip style probe handle houses the digital interface rocker switches that remotely control the head articulation, illumination levels, and the relative gain of the search microphone, the push to talk, and the system power. All system operations are contained in this control console and the switches can be easily operated with one hand.

BATTERY PACK
Two sealed lead acid battery packs are provided to supply power under severe conditions on a continuous basis. The batteries do not develop a "memory" and will hold their charge in storage for several months, losing approximately 5% of their charge per month. Continuous battery endurance is approximately three hours and recharging is accomplished to a 90% level with the included battery charger in two hours. The battery residual is monitored by the system and the relative charge is indicated graphically on the monitor each time a control button is activated. When the battery reaches a low level the graphic indicator will flash advising the operator that replacement is required. If the battery is allowed to completely discharge, the unit will automatically shut down and will return the camera head to center before doing so. The U. S. Department of Transportation has classified the battery as "non-spillable" and "non-hazardous"; thereby, eliminating potential problems with air transportation.

BATTERY CHARGER
An alternating current battery charger is provided to maintain the two battery packs provided at an operational level at all times. Charging units may be switched between 110 VAC and 220 VAC. This unit will provide a 90% charge to a totally discharged battery in two hours; a 100% charge is attained in five additional hours. A battery can be continuously connected and the charger will monitor the battery condition to protect against over charging.

FIELD MAINTENANCE KIT
A field maintenance kit is provided with each SEARCHCAM 2000 system. It contains all of the tools necessary to perform routine maintenance and lamp replacement. Three spare lamps and O-rings are provided.

STORAGE CASE
The entire system, including spare battery, battery charger, sun shield, lanyard, headphones, and maintenance kit packs neatly into one foam-lined Pelican® case. The case, made of high impact plastic, is water and dust tight and will protect the components through the roughest of conditions. Storage Case In Action

REMOTE MONITOR (optional)
A flat screen, LCD active matrix monitor can be used in conjunction with the standard monitor via the multi-port auxiliary output. This unit has a 6' cable permanently attached. Additional extension cables can be used to extend the distance from the SEARCHCAM unit.

DISPLAY EXTENSION CABLES
Extension cables are available to provide remote viewing capability for the standard monitor or for the Remote Monitor accessory. The standard cable is 15' (4.6 m) and multiple extension cables can be connected to provide increased distance. Custom cable lengths can be acquired through special orders. The extension cable is plugged directly into the multi-port output panel at one end and either the standard monitor or accessory equipment at the other end.